Mould can cause severe problems if it gets around your windows. When this happens, the whole design can weaken, and your home can grow colder and less comfortable. If you have old windows in your home which use timber or plastic frames, then the mould is never too far away.

That’s because these frames aren’t weather-resistant, and they don’t have an air-tight design. As a result, condensation can emerge quickly on the windows, and water can seep through the frames. That way, mould develops over time.

Also, mould can get worse if left unchecked. Mould grows at a rapid rate, surrounding your whole window and then spreading into the walls, causing potential structural damage. Additionally, it can evolve into black mould, which can be incredibly harmful.

Black mould can deposit spores into the atmosphere about the window, which cause health problems if you happen to breathe them into your lungs. Therefore, preventing mould is vital. By doing it, you won’t only preserve your window, but you can make your home a safer, healthier place to live.

Fortunately, there are plenty of ways you can prevent mould spreading around windows before it gets a chance to take hold. By doing that, you can also stop condensation, and you can make certain parts of your window don’t rust and wear.

As a result, you could get better performance from your old windows for longer. However, over time, those windows can become more and more vulnerable to mould. Instead of dealing with the constant repairs mould can bring, why not replace? At Double Glazing On The Web, you can get new windows that make mould a thing of the past.

window mould

How Does Window Mould Develop?

Mould around windows is often a by-product of condensation and water ingress. Both of these issues can occur quickly in older windows and during poor weather conditions. Condensation usually takes the form of a mist that develops on the inside pane of your windows.

It happens when the temperatures on the inside and outside of your home are radically different. In an old window design, cracks can develop over time which creates space for these different pressures to collide. When they react, the mist gets into your window and develops into a mould over time.

Both wood and plastic struggle with water, too. Over time, water can seep into the natural cracks you find in a wooden frame. As a result, the timber begins to crack, and water can expand these cracks to make them even worse. Because of this, the cold air from outside can rush into your home, colliding with the warm energy inside.

That creates condensation, and also reduces your home’s temperature considerably, meaning you can rely on your central heating more to make up the difference. Additionally, water ingress can occur when it seeps through the frame, creating conditions where condensation can thrive.

Another reason why mould can spread around windows could be from inside your home. If the window is in a bathroom, kitchen or a utility room you don’t often use, then this space can grow damp, humid and stale. As a result, condensation can emerge in these conditions, and mould can build up quickly after that.

Not only that, but your window could also suffer from mildew, and black mould if you leave it unchecked for a while. That means it’s crucial to check your old windows for signs of it developing regularly.

What Problems Does Mould Around Windows Cause?

Mould can cause your old windows to lose their performance even more quickly. Mould and condensation can block out parts of the glass in your windows. Because of this, natural light can’t enter your living space as freely, meaning you don’t get as much warmth.

Not only that, but mould can eat away at the internal parts of your window. If mould builds up in the corners and gets through the frame, then security features like hinges and locks can stop working. That means your home will be more vulnerable to burglars and intruders.

Also, mould can affect other parts of your home too. From around your windows, it can spread on other windows, plastering, and even in your roof. Once mould begins to move past your window onto other parts of your home, it’s a nightmare bringing it under control.

Eventually, if black mould develops, you can also suffer from respiratory issues. Rather than wait for these problems to occur, though, you can prevent window mould before it ever has a chance to cause issues.

mould in windows

Ways To Prevent Mould Around Windows

If any mould emerges, you can clear it and find ways to stop it from coming back. The most common area mould builds up at is the inside panel of your window. If your window has single-glazed glass, then it can weaken over time, and water can seep through it, causing condensation and, eventually, mould.

To clear it, you can use a dehumidifier, an extractor fan or even a hairdryer if you have one to hand. Another cause of mould on the inside panel can be the humidity in your room. As a result, it’s wise to leave some windows open overnight on occasion to keep fresh air circulating throughout the space.

Sometimes, mould can also emerge around the outside of your windows. However, while it doesn’t look like things are working correctly, you can be sure that it’s a sign your window is still performing well. If mould develops on the outside of old windows, it means the unit is keeping water out.

Most of the time, the reason for window mould emerging outside is dirt building up over time. Because of this, you should give your windows a thorough clean with a mild detergent and damp cloth to ensure dust has no place to grow. Then, it’s wise to clean every couple of months.

Finally, you can prevent mould from coming back. If your window has trickle vents, you can leave them open overnight to make sure a little bit of air is always circulating in your living space.

Additionally, if you have houseplants near windows, moving them away can reduce the humidity around them, making mould less likely to emerge. And, if you want to kill any chance of it returning to play havoc with your home, you can always replace your old windows with a brand-new design.

New Window, Old Mould

With a brand-new design, you won’t have to worry about mould spreading around your windows. Rather than put up with old wooden windows, you can get a design that uses a durable uPVC or aluminium frame. Not only that, but modern windows feature double glazing as standard.

Together, the structure and the glass create an air and water-tight seal, preventing water ingress. Additionally, both features are highly robust, giving you superb insulation. As a result, your living space won’t get cold in the winter, and you can cut the cost of your energy bills as a result.

Also, with double glazing, you’ll get two panes of glass instead of one. When cold air tries to get into your home, it’ll have to get through double the layers of protection. Not only that, but the frame ensures that both cold air and mould can’t get around your windows.

Instead, you’ll get reliable protection from water ingress and condensation. Additionally, both uPVC and aluminium are fully weatherproof frames. Therefore, they won’t crack, warp or twist for decades, and you won’t even have to maintain them regularly!

With uPVC windows, you can get 30 years of stunning performance. Aluminium windows, on the other hand, can last for 50 years, giving you almost a lifetime of benefits. And, because neither window will suffer from mould, they’ll maintain their strength and their shape for much longer.

Because of this, the internal hardware of the window won’t rust, and the whole design will stay secure for your home. You’ll get multi-point locking systems, durable hinges and internal shootbolts so you can enjoy a warmer living space with total peace of mind.

mould around windows prices

Prevent Mould Around Windows with Double Glazing On The Web

You can prevent mould around your windows with brand-new designs. However, one thing that might put you off is the high costs. With Double Glazing On The Web, though, you can be sure you’ll get the best deal possible.

Instead of giving you windows of our own, we refer you to a trusted network of local suppliers. Because of this, you can get a high-quality window from right on your doorstep. A local company won’t charge as much in travel costs, and we extensively review our network to make sure you don’t work with a rogue trader.

Also, many of the companies in our network have approval from bodies like FENSA and CERTASS. And you can speak to several of them to negotiate the best possible deal and get a broader picture of the market. All you have to do to start your journey to prevent mould ever getting around your windows again is to use our online quote builder.

It takes only a few minutes to choose a new window with a unique design, and compare every single part, colour and accessory you could add! We can provide you with a baseline price within seconds, and refer you to our network.

If you’d like to find out more, get in touch using our online contact form or by calling our friendly team on 0800 015 5679!